What is Zero RB? Drafting tips from a pro

What is Zero RB?

Zero RB is a method of drafting whereby you bypass the running back position entirely, early in drafts. Instead of hyper-valuing the most popular every-down running backs, you focus your initial attention on high-end receivers and quarterbacks, and then lean into the RB position later in your draft. This strategy allows you to use the higher injury tendencies, the scarcity of true workhorse RBs in the NFL, and the general chaos of the RB position to your advantage.

There are no set rules for how to employ the Zero RB method. However, a good rule of thumb when using a Zero RB structure in your drafts is to avoid the position until after round 5, but some drafters will expand this to round 8 and beyond. The reason for this is simple, avoiding RBs early allows you to load up on receiving studs and get exposure to some of the highest upside QB/WR and QB/TE stack combos in the league.

Who created the Zero RB strategy?

The most commonly cited creator of Zero RB is Shawn Siegele who coined the phrase back in 2013. At the time, the strategy was considered more radical and mostly applied to season-long redraft leagues.

The Zero RB draft strategy (and other structural drafting methods like Hyperfragile and Anchor RB) were created as a way to counteract the myth that value drafting (or simply taking the best player on the board when it is your turn) is the best way to draft a fantasy football team.

The idea goes something like this:

Since football is a highly volatile sport, choosing the best player available on the board when it is your turn to pick is a much harder task than people make it out to be – and something most fantasy football participants are terrible at (even though we all like to think we’re great at it). Using a method like Zero RB in your drafts allows you to create your teams based on a structure (e.g. targeting receivers early, waiting on RBs till after round five) and allows you to avoid having to make purely player-based or value-based decisions at every pick.

The term Zero RB is far more commonly cited now than it was back in 2014, and it is gaining in popularity as the best ball as a format grows, and best ball contests become more widely available throughout the industry.

Why does Zero RB work?

The Zero RB draft strategy works because it takes advantage of the fact that the RB position tends to be one of the most volatile in football. Injuries, coaching decisions, and general performance spikes, or performance regression, can lead to shifts on the depth charts and in player usage throughout the year.

Running backs have also been cited to have some of the highest “long-term” injury potential in the league (e.g. knee and leg injuries like ACL tears and Lisfranc sprains). However, the volatility of the RB position goes beyond injury proneness. Workhorse RBs are simply a dying breed in the NFL with more teams looking to a committee approach seemingly every year.

Between 2012 to 2014 there was an average of 11 RBs who took 250 or more carries during the season. Conversely, between 2019-2021 the average number of RBs who took 250 or more carries dipped to five.

It is worth nothing that last season did see a bit of a bounce back with eight RBs taking over 250 carries, but that stat also includes 17 games of work (vs the 16 game schedule that was used between 2019-21).

For fantasy purposes, this lack of volume also means that, over time, fewer and fewer of the top-ranked running backs will produce monster seasons.

Why volume is important for fantasy RBs?

Running back tends to be a more volume-based position for several reasons. Most RBs don’t accumulate targets or PPR points at the same rate that receivers do. Additionally, yards on a play-by-play basis are simply harder to come by for RBs. The top RB in 2022 on a per-yard basis, among those who took over 100 carries on the season, was Khalil Herbert, who averaged 5.7 yards per carry. This is opposed to the top WR on a play-by-play basis, among those who saw more than 75 targets, in Jaylen Waddle who averaged 18.7 yards per catch.

Simply put, running backs don’t land as many explosive plays and therefore need volume to thrive. Since they also tend to have far smaller receiving roles than WRs – or even some TEs – without setady volume RBs become more TD dependant and less reliable fantasy players.

Since teams are managing the running back position differently these days, it’s also led to an increase in the upside probability of late-round RBs. This is especially true later in the season when the wear and tear of the NFL tend to cause max chaos with rosters.

This is important for best ball as those later round RBs now have more chances to pay off with potential spike weeks for the playoffs (generally Week 13 and onward).

This later season tendency can be seen perfectly with some data (via Michael Dubner at RotoViz.com) from the 2021 Best Ball Mania II on Underdog Fantasy:

While the Zero RB method wasn’t as reliable as some other structural methods, in-season (it only had a 14.4% playoff success rate), the end-game upside with it was is evident. When the chips were on the line (Weeks 14-17), the Zero RB lineups had the most success and landed a higher rate of finals appearances than any other drafting method employed in the event. Simply put, lineups that took a shot and put their faith in later-round RBs got rewarded with more success, when it mattered, later in the year.

The depth of the WR position

The other reason why the Zero RB draft structure works is due to the fact it's simply easier to pick upside players at wide receiver early in drafts.

As we can see below, courtesy of Rotviz.com, wide receivers taken in the early portions of the draft typically outproduce RBs as a group, year over year.

PPR scoring by ADP

While the top scorer at RB may eclipse the top scorers at other positions, the overall depth at wide receiver means that, for the early rounds of a draft, we’re selecting from a larger pool of studs – and thereby gaining a better chance of hitting on our selection.

Aug 28, 2021; Orchard Park, New York, USA; Buffalo Bills wide receiver Stefon Diggs (14) warms up prior to the game against the Green Bay Packers at Highmark Stadium. Mandatory Credit: Rich Barnes-USA TODAY Sports

Stacking

Taking wide receivers early also allows us to focus on stacking early. Stacking an elite WR with a QB (or elite TE with a QB) is one of the most important things we can accomplish in a best ball draft to set ourselves up for long-term success. Maximizing our best player’s best week, by pairing them with a teammate that they tend to have a strong correlation with (and most top-end WR/QB combos have a strong correlation), can give us access to monster weekly production that can then work to propel us to league and tournament titles in best ball.

Targeting a late-round RB for Zero RB

There’s no set rule of what makes a late-round RB a good target. However, there are certain characteristics we should focus on to give ourselves a better shot at success.

Uncertain backfields

Running backs playing in ambiguous backfields, without a dominant starter, typically make for our best late-round targets. While there is often plenty of coach-speak early in the season about workload and usage, the truth is that there is often only four to six RBs in the NFL, each season, with very defined workhorse-type roles – and even they could see their workloads reduced if performance, or a lack of team success, becomes an issue. The rest of the starting running backs in the NFL are either already in some kind of committee (and at risk of seeing their touches diminished) or playing with very shaky job security.

For our late-round RB picks then we want to target plus athletes but also any RB who is playing behind a starter who we feel may be in for a performance dip, and at high risk of having their projected starting role diminished or cut into.

In 2022, the a great example of this scenario playing out was on the Detroit Lions, who went into the season with DeAndre Swift primed to take a big role as their lead back. Many bought into the hype, selecting Swift early on in drafts as the Lions RB had a second round ADP for most of the 2022 draft season. We all know what happened next, as Swift’s usage plummeted, he got injured and eventually all of the early down work went to former Packer Jamaal Williams, who ended up leading the league in rushing TDs.

While Swift ended up as a massive bust, those zero RB lineups who landed on Williams got a massive boost to their WR heavy builds.

Receiving ability

RBs with good receiving upside should also be high on our list of late-round targets when implementing a zero-RB approach. As teams tend to pass more when they are down in games, a running back with better receiving skills than his back mates, on a bad team, could see a jump in usage any week. Good receiving skills also give an RB a better chance of staying in the team’s rotation, than a back who doesn’t have the same kind of skill.

In 2022, we saw Jaylen Warren carve out a role on the Steelers down the stretch, who are notorish for implementing a one-RB system. Warren outperformed starter Najee Harris considerably as a receiver and ended up taking a 30%+ snap share in six of his final seven games of 2022-23, making him fantasy viable despite not being the lead back.

While there are plenty of different factors that can go into making a late-round RB appealing (receiving ability, pedigree, weak starter) the main types of characteristics we should be targeting when looking at later-round RBs, are below:

Already in some kind of committee role, and playing behind or alongside a shaky veteran starter (even better if that starter is injury prone)
Pass catching ability that will allow him access to bigger weeks when his team’s passing volume spikes
Plus athletes who have shown a propensity for bigger plays or performances in college or pros

When to use Zero RB?

Since the goal of avoiding RBs in the early rounds is to invest more in the heavy upside of WRs, it’s obvious that leagues where 1.0 PPR scoring is the norm are better suited for the Zero RB structure. However, the fact that Zero RB teams had the highest rate of advancement to the finals in the Underdog Fantasy Best ball Mania II tournament from 2021 – an event that uses half-point PPR scoring – also shows it can have success in other scoring formats as well.

Ultimately, we also need to be flexible in what strategy we employ in our best ball drafts. Often what moves our competition make in a draft can help determine what draft structure we should employ.

For example, when the opening of your draft sees many of the top running backs like Christian McCaffrey, Bijan Robinson and Nick Chubb all fly off the board early, leaving little value or appealing options left among the remaining RB selections, it will open up an opportunity to grab multiple stud receivers and structure your draft around the Zero RB method.

Interestingly enough, in 2023 the ADPs on several top WRs have adjusted so that now you can grab bell-cow RBs like Saquon Barkley and Jonathan Taylor in the second round. In many ways this makes a Zero RB approach much tougher and potentially less optimal to implement as top WRs are getting sucked out of the draft early, leaving little reason to avoid the top RBs on the board.

In this sense, modifying your Zero RB method into more of an Anchor RB approach (to take advantage of that early RB value) may be the better long term move for 2023.

You can implement these draft strategies on Underdog Fantasy for your 2023 best ball teams and double your first deposit of up to $100. All you have to do is sign up below with promo code LIFE to get started!

How to draft using the Zero RB strategy?

Zero RB is a structural method of drafting. Like most methods, it’s sometimes OK to slip out of the boundaries and be fluid based on your competition.

Below is a general overview and key points associated with the Zero RB method, points that you should at least be mindful of when employing it in your best ball drafts:

As a general rule of thumb, a Zero RB structure means we do not select an RB until at least around five, but potentially even later.
Early selections should be focused on elite receivers at WR and TE, with an eye to stacking them later with their QBs.
Target late-round RBs
- Looking for quantity over quality – you will generally want to select five (or more) RBs to give yourself a better shot at hitting on a late-round selection.
  - This number is also dependent on the roster rules of whatever site you are drafting on.
- Target RBs that are already in some kind of committee or have a fragile starter that could be easily bypassed.
- Pass catchers or plus athletes who have shown potential for big upside in college, pros, or at combine already.
Allow your competition to dictate when you employ Zero RB.
- If people are over-drafting RBs early on, that’s often when it’s best to employ the Zero RB approach – this will be often as most drafters continue to overvalue RBs early.
  - If everyone is skipping RBs early, it’s OK to switch to an Hyperfragile or Anchor RB approach.

In-season management for Zero RB teams

If you are looking to use Zero RB as an approach in your season-long redraft leagues then there are a few other things to mention. Obviously, in redraft leagues, we have the ability to look at the waiver wire and make changes to our roster. If you drafted using Zero RB then you should be looking to make good use of your FAAB and/or waiver priority to go after solid upside at RB when available.

If an injury occurs to a starter, grabbing a backup RB from that team who could see his role increase from the waivers would be vitally important for your team given its heavy WR/TE roster makeup.

A great example from 2022 was Jerick McKinnon from the Kansas City Chiefs. When Clyde Edwards-Helaire went down early with injury, many ignored McKinnon not figuring his role would amount to much more than a few snaps per game. However, McKinnon was a great stash and become a focal point of the Chiefs offense down the stretch, scoring at least one TD in each game between weeks 13-18.

Like best ball, in redrafts, you should be focused on quantity over quality when taking the zero-RB approach and get used to going after as many “home run” plays at RB as possible on the wire, especially early in the year.

Zero RB strategy in dynasty

Since dynasty leagues often take a longer-term approach, Zero RB is also an excellent strategy to employ there as well. Bypassing older RBs in the early rounds and focusing on later-round RBs with the same principles we listed above (fragile starter, good pass catcher, A+ upside if his role changes) is a good way to begin dynasty leagues and will potentially give your lineups excellent foundation at the receiver positions.

One quirk about using the strategy in dynasty leagues though is to remember that it’s also OK to go after running backs early in the yearly rookie draft. Since you loaded up on other receivers (and potentially TEs and QBs) during the startup, looking to grab upside at RB within the new batch of players being introduced only makes sense and will give you a good shot at building out a monster lineup over time.

Zero RB strategy in best ball

As we mentioned above, the upside that Zero RB gives us makes it an ideal method to deploy in larger field best ball tournaments. However, since we don’t have any waiver wires or rookie drafts we can use to shore up our roster after the draft, it's important that we remain nimble while in our best ball drafts.

If running backs aren’t flying off the board early, we can adjust our strategy and look to other similar, and profitable, methods to employ instead. Thus far in 2023, employing a zero-RB approach has not been easy given the rising ADPs of the top WRs. That’s led to better value opportunities for those using Hyperfragile or Robust RB drafting methods.

Zero RB method vs Anchor RB method

One other method that has produced solid results in larger best ball tournaments is the Anchor RB method. Similar to Zero RB, Anchor RB has us focusing on loading up with receivers early in the draft. The main difference though is that instead of bypassing the RB position entirely in the first 5+ rounds, we are giving ourselves the leeway of selecting one high-end RB to “anchor” our lineups around.

Most Anchor RB teams look like this:

Select one high-end RB in round one or two
Don’t draft another RB until AT LEAST round six
Tend to max out at five to six RBs for the roster (assuming a 1QB/3WR/2RB/Flex lineup)

The appeal of the Anchor RB method is that it gives us a shot at landing on a potential league-leading type of player, who could deliver a legendary type of season – much like Jonathan Taylor did in 2021 when he bested the number two ranked RB Austin Ekeler by over 40.0 points for the year in half-point PPR scoring.

This method has also proven to be successful in big tournaments like Underdog’s Best Ball Mania, and lineups using Anchor RB had a higher rate of making the playoffs in that event than the Zero RB strategy – although the Zero RB strategy lineups made the finals with more regularity.

Is Zero RB a good strategy, and when should you implement it?

Zero RB is one of a basket of strategies that you can use to structure your fantasy football drafts and get away from purely “value-based” drafting. While it remains a risky strategy that can blow up quickly if none of your later-round RBs hit, it has been proven to produce big upside more frequently than other methods. It produced the highest rate of finals appearance of any lineup construction in the Best Ball Mania II tournament on Underdog Fantasy.

Since many of the best ball tournaments now have well over 50,000 participants (Best Ball Mania IV on Underdog has an astounding 677,376 entries) taking risks with a strategy like Zero RB makes a ton of sense in these events where the goal is not just to cash, but to give ourselves a realistic chance at the top prizes (in this case $3M and $500,000 for top regular season lineup).

As noted throughout the article, Zero RB also tends to work better when you’re in a draft where others are already hyper-valuing early-round RBs and allowing the more elite receivers to fall to lower positions. As such, often the best time to implement a Zero RB strategy is when you feel that you’re getting a better value on an available WR or TE with your first or second-round pick, than on any of the RBs left on the board.

Zero RB then can be a great way to counteract some of your opponent's draft tendencies while still building out some of the best upside lineups possible. While it carries more bust potential than other structural methods, Zero RB does deliver in that it produces consistently better upside than other draft methods as well. This alone makes it a valuable strategy and one you should be ready and willing to employ when entering your best ball drafts this year.

What is Zero RB - FAQ:

What is the RB deadzone?
- This was a term coined by Establish the Run’s Jack Miller, who helped identify the -EV returns of drafting RBs between rounds 3-6. The dead zone theory supports the idea of a Zero RB (and Anchor RB) approach as it purports that WRs drafted between rounds 3-5 are more valuable and produce better returns over time than their RB counterparts taken in that range.
What is the best drafting strategy?
- There are numerous successful draft structures we can employ in our best ball and redraft leagues. The success of these methods will fluctuate year over year (based on certain positional spikes) but, overall, Zero RB, Anchor RB, and Hyperfragile RB methods have all proven to be successful strategies, especially in larger best ball tournaments.
Is Zero RB the best drafting strategy?
- Zero RB had the highest rate of finals appearances in the Underdog Best Ball Mania II event from 2021–of all structural methods employed in the draft. It is great at creating potentially massive upside lineups but does carry more bust potential than other methods like Anchor RB.
- For 2023 it’s worth noting that with many of top WRs now having first round ADPs, Zero RB approaches may include drafting an RB earlier than round 5 in order to take advantage of the falling ADPs on many main carry RBs
Does Zero RB mean we take Zero RBs in our draft?
- No, it simply means that you avoid drafting RBs for the early rounds of your draft and focus on the RB position later, usually after round 5.
If you are using Zero RB, when should you take your first RB?
- There are no set-in-stone rules for how to employ the Zero RB method. However, a good rule of thumb when using a Zero RB structure in your drafts is to avoid the RB position until at least after round 5. Being flexible though based on your competition (and what they are doing) is important as well. If top Running Backs are flying off the board early, the zero RB method will almost certainly be a good way to counteract that kind of action.
What are the best places to use the Zero RB method?
- The Zero RB method has been proven to be successful in larger best ball tournaments, where we’re competing for massive top-end prizes and going up against hundreds of thousands of participants. However, it can also be a good way to approach redraft and startup dynasty leagues where the rookie draft and waiver wire allows us to backfill the RB position.

Zero RB in 2022

2023 is an interesting year for the Zero RB approach. ADPs on the top WRs and quarterbacks are as high as they have ever been. At the moment there are four WRs with top five ADPs and seven WRs in the top 12 of the current Underdog ADP rankings.

This push to grab the leagues best WRs as early as possible has also resulted in a push down on some very reliable and high-end RBs. Names like Jonathan Taylor (the consensus number one pick from 2022) and Saquon Barkley are now going outside the first round.

While we may see some normalization as we get closer to the regular season – with some of the top RBs getting a bounce and once again getting first round valuations – right now the Zero RB approach is getting tested. Since big name, bell-cow RBs are becoming available later and later into drafts, waiting to draft an RB until after round five means potentially bypassing some great deals and value.

As Dwain McFarland has noted, this push down in ADP on the big name RBs has made grabbing at least one RB early a more attractive strategy in 2023.

“Due to these factors, my favorite approach to RB in 2023 is grabbing one high-end option in the first three rounds and then piecing together the rest of my unit by focusing on ADP value after I have four or five WRs.”

One advantage to maintaining a Zero RB or modified Zero RB approach in this kind of environment is that many of the names who we used to think were over valued as round 3-5 selections in 2022 (once known as the RB dead zone), are also now available in rounds 5-8, making them good leads or anchors when attempting to stick with a hardcore, Zero RB approach.

One thing to remember when executing any Zero RB approach is the “texture” of the RBs you are drafting. Because we are waiting for the chaos of the season to kick in and vault some of our RBs from obscurity into fantasy relevance, balancing some contingent selections (e.g. handcuff RB) with primarily pass-catching RBs who can provide us with some usable weeks right out of the gate is often a good idea.

Looking at current ADPs across a few different sites, here are my favorite archetypes of Zero RBs to target in 2023 drafts, as well as specific players to select. A great Zero RB target will generally fall into a couple of these buckets:

Rookies

First-year players are often discounted because of role uncertainty

Rookies are the skeleton key of Zero RB drafting. They are often discounted in drafts because of ambiguity surrounding their role, but year after year we see rookie RB production peaks in the playoffs and can therefore supercharge WR-heavy teams when it matters the most.

Every rookie RB target below will be joining a backfield with an established incumbent, but history tells us that a couple of them will wrestle away the lion’s share of the touches by the end of the season.

When drafting a rookie RB, I’m looking for backs who check a couple of these boxes:

Solid college production profile
Discounted ADP
Elite offensive environment
Immediate path to touches

2023 rookie targets:

Zach Charbonnet - Seahawks (Round 8)
Kendre Miller - Saints (Round 9)
De'Von Achane - Dolphins (Round 10)
Tank Bigsby - Jaguars (Round 11)
Tyjae Spears - Titans (Round 14)

Notes: Spears isn’t playing in an elite offense and likely won’t get a lot touches right away but could be a league winner if Henry gets hurt.

Charbonnet, Miller and Bigsby are all likely to be involved from the get-go and have an immediate path to at least some touches.

Charbonnet and Bigsby are also playing in elite offenses so could become league winners if their starter went down.

You can start targeting these rookies on Underdog Fantasy, where you can also get a 100% deposit match of up to $100 when you sign up below with promo code LIFE. Sign up and start drafting today!

Ambiguous backfields

Backfields that appear to be full-blown committees, but there’s the potential for one back to pull ahead

It’s a normal reaction to want to stay away from ambiguous backfields that appear to be timeshares, but JJ Zachariason has shown that these are actually the exact situations we want to be targeting.

Think Tony Pollard and Ezekiel Elliott in 2022, who were both going in the early-to-mid rounds because the market wasn’t sold that either one would be able to distance themselves from the other and post a monster season. Despite going after Elliott, Pollard ended up as the RB7 in 0.5 PPR scoring and was a league-winning Zero RB pick.

When drafting players in ambiguous backfields, I’m looking for players who check a couple of these:

Explosive athletic profile
Discounted ADP (anything after Round 7ish)
Elite offensive environment
Teams who prioritize running the ball

2023 ambiguous backfield targets:

Chiefs (Clyde Edwards-Helaire, Isiah Pacheco, Jerick McKinnon)
Seahawks (Kenneth Walker, Zach Charbonnet)
Bills (James Cook, Damien Harris, Latavius Murray)
Eagles (D'Andre Swift, Rashaad Penny, Kenneth Gainwell)
Dolphins (De'Von Achane, Raheem Mostert, Jeff Wilson)
Lions (Jahmyr Gibbs, David Montgomery)

Notes: We know the Seahawks want to establish the run so there are points to be had there.

The Chiefs, Eagles and Bills are three of the most high-scoring offenses in the league that we should be targeting from all angles.

The Lions could produce two high-end scorers just given how efficient their offense was last year.

Contingency-based plays (handcuff RBs)

Handcuff RBs, backups aka anyone who would benefit from an injury in front of them

Contingency-based selections will often project for very few points on paper, but represent the highest upside selections we can make in drafts. These are the backs who can serve as a 1-for-1 role replacement for the starter.

Jan 1, 2023; Baltimore, Maryland, USA; Pittsburgh Steelers running back Jaylen Warren (30) rushes during the second half against the Baltimore Ravens at M&T Bank Stadium. Mandatory Credit: Tommy Gilligan-USA TODAY Sports

While these RBs may be zeroes on your bench if the starter remains healthy, they are virtually guaranteed to contribute starting points to your lineup if anything happens to the starter.

When drafting handcuff RBs, I’m looking for players who check a couple of these:

Explosive athletic profile
Discounted ADP
Bell-cow upside (catch passes)

2023 handcuff targets:

AJ Dillon - Packers (Round 9)
Tyler Allgeier - Falcons (Round 11)
Jaylen Warren - Steelers (Round 10)
Antonio Gibson - Commanders (Round 8)
Chuba Hubbard - Panthers (Round 16)

Notes: There are backup RBs on every team, but these players have the potential to step in for the starter and soak up almost all of the touches.

Pass-catching backs

RBs who have a defined role and can give us a solid floor via receptions

It can often take time for our other targets (rookies, handcuffs) to start accruing points, so we need to make sure we are getting some usable weeks out of the gate to tide us over.

Pass-catching RBs are often unsexy selections because they don’t offer bell-cow upside, but they are incredibly valuable to Zero RB teams.

When drafting pass-catching RBs, I’m looking for players who check a couple of these:

Proven track record of catching passes
Discounted ADP
Offense where QBs like to check down

2023 pass-catching targets:

Jaylen Warren - Steelers (Round 10)
Devin Singletary - Texans (Round 11)
Michael Carter - Jets (Round 17)
Kenneth Gainwell - Eagles (Round 14)
Chase Brown - Bengals (Round 16)
Pierre Strong - Patriots (Round 18)

Notes: While backs like Strong and Gainwell are unlikely to ever have a role beyond catching passes, some of these backs have sneaky contingent upside as well.

RBs like Warren, Singletary and Carter could potentially provide a pass-catching floor right out of the gate but also step into a bigger workload in the event of an injury.